pyrogeorge Posted August 3, 2009 Share Posted August 3, 2009 60Euros if i remember correctly. Link to comment Share on other sites More sharing options...
scarbelly Posted August 4, 2009 Share Posted August 4, 2009 How much were the plates? Link to comment Share on other sites More sharing options...
pyrogeorge Posted August 4, 2009 Share Posted August 4, 2009 12euro per plate. Link to comment Share on other sites More sharing options...
Gunzway Posted September 26, 2010 Share Posted September 26, 2010 Finally! I was able to bring an old press home that wasn't going to any use at work. The thing is very heavy and will give you a hernia if you try to pick it up. Managed to get it with a trolley and we are renting a truck, so I was able to use the hydraulic platform thing to lift it up and lift it down. It's a foot pedal press, I don't know too much about it but it will satisfy my needs such as fountains, small rockets etc. Right now, I need to work on the lathe so I can get my tools compatible with it. Might even spin up some other tools while I'm there. http://i206.photobucket.com/albums/bb95/Gunzway/IMG_1023.jpg I've been missing my rockets laterly . Made a promise of myself to not make any without a press due to the accidents that can occur. Should be all good when I get it all set up. Link to comment Share on other sites More sharing options...
Recommended Posts