Jump to content
APC Forum

PyroPractic fireworks


PyroPractic

Recommended Posts

Hello everybody.

My name is Dmitry, I'm from Moscow and I'm 16 years old. I'm fond of making pyrotechnics.

In Russia, it is difficult to deal with legally so many people are engaged in a favorite business is not legal.

At the moment I have a pyrotechnics certificate and I can legally intimidate proffessional pyrotechnics.

I have a channel on youtube piropractic but there is a part of the video with the production under the link so all the videos are in this group https://vk.com/clubpyropractic.

As far as I will post videos here and share information with you. I'm also working on equipment.


My last equipment is shell pasting machine (Now I'm working out the dispenser and remodeled the wheel.In the further as completely finalize this machine will already video and in the English)


And my self-made shell


And 3 inch underwater shell


More starts can be seen on my YouTube channel "PyroPractic"

Edited by PyroPractic
  • Like 5
Link to comment
Share on other sites

I love the combination ball mill/ star roller on your channel! Some rare earth magnets would help mounting of the attachments I bet. Thanks for sharing.

Link to comment
Share on other sites

Yes, thank you for sharing. I am also interested in your machines. Thank you!
Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

Hello everybody.

This is my homemade 3 inch shell orange wave.(sticker for safety)

Unfortunately the shell partially fell into the video.



Edited by PyroPractic
  • Like 2
Link to comment
Share on other sites

I have only used the round one with good success.

Link to comment
Share on other sites

Man that Was nice..

Very crisp!

Link to comment
Share on other sites

Hey.

Launched a 2-inch red wave and a 3-inch wave change.

In 3 inches one red red green wave, the other green in a red wave (in half).


Link to comment
Share on other sites

Some pretty nice creative ideas there, Dmitry. Wish I could have understood more of the audio. Keep up the creative work.

 

You might consider speeding up the mill so that the media cascades and eliminating the bumpers in the jar. Most of us don't use any bumpers in the jars even though it is a common practice in milling.

 

By eliminating those you make cleaning the jar so much easier and hopefully you're using an acceptable media for most it is hardened lead. The bumpers will cause wear I'd think on the lead. If you're using a stronger media you'd likely be abusing the bumpers.

 

All and all though you show some great creative skills.

 

Maybe Caleb can take some lessons on hand speed from the lathe video :-)

Link to comment
Share on other sites

All with the coming new year.

These are my starts for the new year, 2 and 3 inches.

2 "recorded selectively the shell.

3" did not record one very good shell of the white wave, and in the shell the red and green most likely undermined the stars.


dbb0aaac158d.jpg

f30979f60c19.jpg




Edited by PyroPractic
  • Like 3
Link to comment
Share on other sites

Santa was good to you! Lucky you!
  • Like 1
Link to comment
Share on other sites

Hi.It's my shell pasting machine.

 

Edited by PyroPractic
  • Like 4
Link to comment
Share on other sites

Very nice presentation
  • Like 1
Link to comment
Share on other sites

  • 5 weeks later...

Looks better than our commercial Allpax cutter since it uses the mini utility knife blades. Nice!

Ya'll need to turn on English subtitles and laugh your ass off!

Link to comment
Share on other sites

  • 2 weeks later...

16, huh?

Man, I've wasted my life. This kid's got a helluva future ahead of him. Very impressive.

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

My new crossette tool for 3 and 6 parts.

Tools on sale, who needs to write in private messages.

http://s1.radikale.ru/uploads/2018/3/5/35e7ab318bc35241f1ae127a9b4e40f5-full.jpg

http://s1.radikale.ru/uploads/2018/3/5/1b6e30d0313dc0bb8cea9e0a57d4cc01-full.jpg

http://s1.radikale.ru/uploads/2018/3/5/e923a3772c1612fb35d7f0d5bd558bee-full.jpg

http://s1.radikale.ru/uploads/2018/3/5/5f728ba9735c93b19ed2752834c57e7f-full.jpg

http://s1.radikale.ru/uploads/2018/3/5/353508127f336d5d0ed15d80e220af7a-full.jpg

  • Like 4
Link to comment
Share on other sites

My wad cutting tool.30mm to 250mm circles(wad).

You can buy, the price is 95 $ + shipping

 

 

http://s1.radikale.ru/uploads/2018/3/6/2121b8ba3c9fb28a54c797223c9913b8-full.jpg

http://s1.radikale.ru/uploads/2018/3/6/46ecd4834c8ddf432439b624fe8e32f0-full.jpg

http://s1.radikale.ru/uploads/2018/3/6/a088bc6d44b2d60fe381c0667a22e5dd-full.jpg

http://s1.radikale.ru/uploads/2018/3/6/2593bbb7bc30dfb14f2abcad79bc0fba-full.jpg

Edited by PyroPractic
Link to comment
Share on other sites

My new effect.

Stinger 20mm with whistle and crackling comet

 

KClO4 70

Sodium benzoate 30

Edited by PyroPractic
  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...