106 replies to this topic

[PyroPractic]

Hello everybody.

My name is Dmitry, I'm from Moscow and I'm 16 years old. I'm fond of making pyrotechnics.

In Russia, it is difficult to deal with legally so many people are engaged in a favorite business is not legal.

At the moment I have a pyrotechnics certificate and I can legally intimidate proffessional pyrotechnics.

I have a channel on youtube piropractic but there is a part of the video with the production under the link so all the videos are in this group https://vk.com/clubpyropractic.

As far as I will post videos here and share information with you. I'm also working on equipment.

 

My last equipment is shell pasting machine (Now I'm working out the dispenser and remodeled the wheel.In the further as completely finalize this machine will already video and in the English) 

 

And my self-made shell 

And 3 inch underwater shell

More starts can be seen on my YouTube channel "PyroPractic"

Edited by PyroPractic, 07 November 2017 - 06:50 AM.

[redbullzuiper]

Lol, I would love to get such a machine. Really nice.

Edited by redbullzuiper, 06 November 2017 - 04:27 PM.

[Yus]

Nice jоb!

[OldMarine]

I love the combination ball mill/ star roller on your channel! Some rare earth magnets would help mounting of the attachments I bet. Thanks for sharing.

[wncranger]

Yes, thank you for sharing. I am also interested in your machines. Thank you!

[PyroPractic]

All greetings. These is pump for crosettes .Cross I do on a lathe. There are for 16,21 and 26mm crossettes. 

https://pp.userapi.c...p8Jcbw3goOQ.jpg

https://pp.userapi.c...WTXr6qkF7HE.jpg

https://pp.userapi.c...yA33UZrNdcA.jpg

https://pp.userapi.c...VwxY8Oi9EjM.jpg

https://pp.userapi.c...Oq8fEb-Uxc8.jpg

Edited by PyroPractic, 24 November 2017 - 05:06 AM.

[PyroPractic]

Hello everybody.

This is my homemade 3 inch shell orange wave.(sticker for safety)

Unfortunately the shell partially fell into the video.

Edited by PyroPractic, 20 December 2017 - 03:46 PM.

[dynomike1]

I have only used the round one with good success.

[Bigmark]

Dam nice work.

[calebkessinger]

Man that Was nice..
Very crisp!

[PyroPractic]

Hey.

Launched a 2-inch red wave and a 3-inch wave change.

In 3 inches one red red green wave, the other green in a red wave (in half).

[calebkessinger]

Those were nice

[Boophoenix]

Some pretty nice creative ideas there, Dmitry. Wish I could have understood more of the audio. Keep up the creative work.

You might consider speeding up the mill so that the media cascades and eliminating the bumpers in the jar. Most of us don't use any bumpers in the jars even though it is a common practice in milling.

By eliminating those you make cleaning the jar so much easier and hopefully you're using an acceptable media for most it is hardened lead. The bumpers will cause wear I'd think on the lead. If you're using a stronger media you'd likely be abusing the bumpers.

All and all though you show some great creative skills.

Maybe Caleb can take some lessons on hand speed from the lathe video :-)

[PyroPractic]

All with the coming new year.

These are my starts for the new year, 2 and 3 inches.

2 "recorded selectively the shell.

3" did not record one very good shell of the white wave, and in the shell the red and green most likely undermined the stars.

Edited by PyroPractic, 01 January 2018 - 08:15 AM.

[OldMarine]

I liked the 3" Palm shell. Very nice.

[PeteyPyro]

Santa was good to you! Lucky you!

[PyroPractic]

Hi.It's my shell pasting machine.

 

Edited by PyroPractic, 06 January 2018 - 04:02 PM.

[PeteyPyro]

Very nice presentation

[PyroPractic]

Hi. Its my new cutting tool.

Edited by PyroPractic, 05 February 2018 - 02:57 PM.

[OldMarine]

Looks better than our commercial Allpax cutter since it uses the mini utility knife blades. Nice!

Ya'll need to turn on English subtitles and laugh your ass off!