kleberrios Posted November 28, 2013 Share Posted November 28, 2013 (edited) Large bushings Ti grade 2 and grade 5 should be shredded before going to the mill cut because it is impossible to throw them into the mill. They must be cleaned to remove the cutting oil and are very difficult to grind ata 20/100 mesh. There in the courtyard 4 ton to be processed. Use the sander to detect if the bags I bought is not stainless steel because stainless steel is dificult generate spark and the spark if iron is red. In case the video is all Ti Ti Chips has a gray color and the stainless steel is much clearer https://www.youtube.com/watch?v=oT7Uy6ezYgM&feature=youtu.be Edited November 28, 2013 by kleberrios Link to comment Share on other sites More sharing options...
Arthur Posted November 28, 2013 Share Posted November 28, 2013 A friend gets fine Titanium from a spark erosion machine, it is VERY fine and usually grade 5 Ti. Link to comment Share on other sites More sharing options...
kleberrios Posted December 1, 2013 Author Share Posted December 1, 2013 A friend gets fine Titanium from a spark erosion machine, it is VERY fine and usually grade 5 Ti.Hydrofluoric acid attacks Ti and left a very fine powder, but the powder of different electro erosion, Ti is no more but an inert dark powder. Link to comment Share on other sites More sharing options...
Recommended Posts