Jump to content
APC Forum

Calcium Nitrate for an oxidiser?


ollie1016

Recommended Posts

Hello All, I've been searching around and seen that Calcium Nitrate is cheaper than Potassium

Nitrate. I was wondering if anyone has had any experience with it and could tell me a bit about it. I've searched google a bit and YouTube, but not really found a lot that's pyro related. I wouldn't be using it for my bp, but maybe as a oxidiser for some of my rockets.

Any information would be great.

Thanks

Link to comment
Share on other sites

Calcium nitrate is way too hygroscopic to use in pyro mixes.
Link to comment
Share on other sites

Calcium nitrate is way too hygroscopic to use in pyro mixes.

 

Practical pyrotechnics that is. You can still experiment with it, of course . . . ya know, for science. (;

Link to comment
Share on other sites

It can be a valuable oxidizer for chemistry as stated above. It can be used to create other hard to get nitrates by double decomposition .
Link to comment
Share on other sites

As stated above Calcium nitrate [Ca(NO3)2] AKA: (Norwegian saltpeter) is the extremely hygroscopic, much more than Sodium nitrate. Because of that it's not used much in pyrotechnics.

Edited by pyrowinner
Link to comment
Share on other sites

But after all as pyrojig stated that 'it can be a valuable oxidizer for chemistry' Edited by pyrowinner
Link to comment
Share on other sites

yes, but its normally trihydrate.

 

*tetrahydrate, Ca(NO3)2.4H2O

Link to comment
Share on other sites

If you can get it, mix it with the carbonat of the Nitrate you wan`t to get (Maybe you need to boil). Calciumcarbonate will precipate. Also sulfates work.

 

You`re nitrate will stay in solution.

Probably won`t work with Barium as these Salts are insoluble too

Link to comment
Share on other sites

×
×
  • Create New...