MrW Posted December 24, 2012 Share Posted December 24, 2012 Thanks FlaMtnBkr, i will get some @$25/kg I'm guessing that's reasonable? Link to comment Share on other sites More sharing options...
FlaMtnBkr Posted December 24, 2012 Share Posted December 24, 2012 That is a reasonable price. Not the very best but could do a lot worse. They can be reused so the cost won't be a reoccuring one. Link to comment Share on other sites More sharing options...
Sulphurstan Posted November 19, 2016 Share Posted November 19, 2016 I bet these will mushroom out of their tubes like muffins out of their cups. Boric acid and magnesium is a bad idea, together with hardwarestore acetone this might be indeed somewhat hazardous... And considering the fuse, I used fast visco fuse with succes, 10cm/sek.@mabuse.Did your go getters with the united nuclear formula went well directly at the first time? I m beginning with this formula, and i have lot of trouble to get a quick burn, maybe the size of my Mg (have to check), or the rather high (in my opinion) amount of parlon.. Why is there that much parlon? I have the feeling, it slows down the burning. If somebody has experience with this united nuclear go geters comp, i would appreciate any hints.. Link to comment Share on other sites More sharing options...
dynomike1 Posted November 20, 2016 Share Posted November 20, 2016 I hope someone can figure this out, i never could get any color ones off the ground. Link to comment Share on other sites More sharing options...
mabuse00 Posted November 20, 2016 Share Posted November 20, 2016 @mabuse.Did your go getters with the united nuclear formula went well directly at the first time? I m beginning with this formula, and i have lot of trouble to get a quick burn, maybe the size of my Mg (have to check), or the rather high (in my opinion) amount of parlon.. Why is there that much parlon? I have the feeling, it slows down the burning. If somebody has experience with this united nuclear go geters comp, i would appreciate any hints..I have only used the brilliant rubber formulas (aka independence red) thus far, and swapped Mg for MgAl. This was some time ago, i used a little coreburner rocket tool... I cannot remeber I ever used the united nuclear formula. You will have to follow the original instructions, that means make it very wet (and thus foamy)and use a piece of blackmatch, preferably some kind of thermalite formula as the core.I would not use Mg again. Coincidentally Im about to get a new go getter tool In this case I plan to use the brilliant rubber formula again, this time with MgAl. Link to comment Share on other sites More sharing options...
Sulphurstan Posted November 20, 2016 Share Posted November 20, 2016 Thanks Mabuse00, I ll try to find this brilliant red formula. Link to comment Share on other sites More sharing options...
Sulphurstan Posted April 8, 2017 Share Posted April 8, 2017 I hope someone can figure this out, i never could get any color ones off the ground.I finally did! My mg was too big in size. I now use MgAl, 45 micrometers, and they ALL take of. Gonna share some vidéos one of these days. Link to comment Share on other sites More sharing options...
dagabu Posted April 11, 2017 Share Posted April 11, 2017 In parts: Strontium Nitrate 53 Magnalium, fine, 325 mesh 19 Parlon 17 Phenolic Resin 7 Heamine 4 Brilliant red, moves nicely, easy to press by hand into a copy paper wound tube, takes fire well and dries rock hard!! Link to comment Share on other sites More sharing options...
Recommended Posts