allrocketspsl Posted January 15, 2012 Share Posted January 15, 2012 (edited) http://www.youtube.com/watch?v=oL_9GjqUd60 new demo Edited January 15, 2012 by allrocketspsl Link to comment Share on other sites More sharing options...
Thunderr1 Posted January 15, 2012 Share Posted January 15, 2012 Looks like it works! Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 16, 2012 Author Share Posted January 16, 2012 (edited) Looks like it works! it does, www.pyrocreations.com is pre selling them and has already sold a couple even without the video up yet,lol Edited January 16, 2012 by allrocketspsl Link to comment Share on other sites More sharing options...
TSO Posted January 16, 2012 Share Posted January 16, 2012 When are they up for sale here? I'd much prefer buy direct. Usually works out to we get a better deal and you make more per unit without the middle man. Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 17, 2012 Author Share Posted January 17, 2012 When are they up for sale here? I'd much prefer buy direct. Usually works out to we get a better deal and you make more per unit without the middle man. going out tomorrow mate Link to comment Share on other sites More sharing options...
ExplosiveCoek Posted January 17, 2012 Share Posted January 17, 2012 Now what if you want a different delay then the one you used in the vid? The bm 'drill' doesn't look really useful to me. The way it is now that is. It's better to make a punching device, and make it adjustable for different lengths . Or just leave the second hole out and reverse the timefuse. Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 17, 2012 Author Share Posted January 17, 2012 Now what if you want a different delay then the one you used in the vid? The bm 'drill' doesn't look really useful to me. The way it is now that is. It's better to make a punching device, and make it adjustable for different lengths . Or just leave the second hole out and reverse the timefuse. if you use the drill block youll see and it looks like I didnt mention the fact that the block is three inches long the fuse goes into it and there are holes drill at one inch for three second timing timing the next hole is at two inches then 1/4 inch increments so you can make any delay you want by where to drill.I will put up a pic of what I mean Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 17, 2012 Author Share Posted January 17, 2012 (edited) here they are,by drilling it makes a tar free fuse,alot of the core is removed punching anyway you do it can still get tar to cover the bpthanks for the feedback and hope this clarifiesthe drill is 7/64 almost a full 1/8 inch and when you see how much comes out of the core youll be amased mate! Edited January 17, 2012 by allrocketspsl Link to comment Share on other sites More sharing options...
dagabu Posted January 17, 2012 Share Posted January 17, 2012 here they are,by drilling it makes a tar free fuse,alot of the core is removed punching anyway you do it can still get tar to cover the bpthanks for the feedback and hope this clarifiesthe drill is 7/64 almost a full 1/8 inch and when you see how much comes out of the core youll be amased mate! All, In your picture you show that the drill bit got a little sideways and bit the block a little. I have found that the use of roll pins (appropriately sized ID) work well as drill guides and cost about $.05 each. Just a thought. -dag Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 17, 2012 Author Share Posted January 17, 2012 All, In your picture you show that the drill bit got a little sideways and bit the block a little. I have found that the use of roll pins (appropriately sized ID) work well as drill guides and cost about $.05 each. Just a thought. -dag explain i need feedback real feedback,it took frissbee 10 years to get on the market and only then by chance Link to comment Share on other sites More sharing options...
dagabu Posted January 17, 2012 Share Posted January 17, 2012 Here is an example, Harry over at Skylighter has tooling made for him and this shows a block not to different then yours with a roll pin drill guide in plastic. I have one of these (smaller version) and it works very well. http://www.skylighter.com/images/how_to/stinger-missile-rockets/drill-guide-hole-choice.jpg -dag Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 17, 2012 Author Share Posted January 17, 2012 Here is an example, Harry over at Skylighter has tooling made for him and this shows a block not to different then yours with a roll pin drill guide in plastic. I have one of these (smaller version) and it works very well. http://www.skylighter.com/images/how_to/stinger-missile-rockets/drill-guide-hole-choice.jpg -dag ok I follow ya,when I drill mine I hold it up to the drill stand so I get a nice 90 degree to the fuse,thanks mate Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 17, 2012 Author Share Posted January 17, 2012 dag look at 20 second its against the drill stand Link to comment Share on other sites More sharing options...
dagabu Posted January 17, 2012 Share Posted January 17, 2012 dag look at 20 second its against the drill stand Yup, I get that but the hole will degrade over time and a drill guide will keep that from happening. Nuff said, it's just feedback not a judgement, I am looking forward to getting my paws on one so I can get some timed reports in the air to show the quality of the build. -dag Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 17, 2012 Author Share Posted January 17, 2012 Yup, I get that but the hole will degrade over time and a drill guide will keep that from happening. Nuff said, it's just feedback not a judgement, I am looking forward to getting my paws on one so I can get some timed reports in the air to show the quality of the build. -dag I gotcha great feedback mate Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 19, 2012 Author Share Posted January 19, 2012 http://www.youtube.com/watch?v=qZtmErJNCGo&feature=player_detailpage#t=2s Link to comment Share on other sites More sharing options...
TSO Posted January 22, 2012 Share Posted January 22, 2012 (edited) Got my new version fresh off the assembly line yesterday via post. Looks real nice Jeff. Hope to have time tommorrow to try it out. Edited January 22, 2012 by TSO Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 22, 2012 Author Share Posted January 22, 2012 Got my new version fresh off the assembly line yesterday via post. Looks real nice Jeff. Hope to have time tommorrow to try it out. cool always fun to get new things let me know how you do you now can cut very precisely better than others your fuse.make ten one length ten another making all types of shells,make some Maltest style ones! Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 24, 2012 Author Share Posted January 24, 2012 if people dont want a drill they can have a punch Link to comment Share on other sites More sharing options...
TheArchitect23 Posted January 28, 2012 Share Posted January 28, 2012 id be interested in seeing the punch version in action!=] Link to comment Share on other sites More sharing options...
allrocketspsl Posted January 28, 2012 Author Share Posted January 28, 2012 id be interested in seeing the punch version in action!=] its done just have to do the video,nest week Link to comment Share on other sites More sharing options...
Recommended Posts