fizeau Posted November 18, 2006 Share Posted November 18, 2006 my wheel, only a little feller...short action video: http://www.youtube.com/watch?v=CVnaytP479Q Link to comment Share on other sites More sharing options...
fizeau Posted November 18, 2006 Author Share Posted November 18, 2006 won´t work...I try it again:http://www.youtube.com/watch?v=1gJPP9bcNYw Link to comment Share on other sites More sharing options...
ewest Posted November 19, 2006 Share Posted November 19, 2006 Both links worked for me. Nice little wheel, not very long but you have all the principles down. Good job. Link to comment Share on other sites More sharing options...
Chemguy Posted November 19, 2006 Share Posted November 19, 2006 Nice wheel, I liked the colours, what did you use? It isn't that long, but Quality over quantity remember . Link to comment Share on other sites More sharing options...
cplmac Posted November 19, 2006 Share Posted November 19, 2006 I really liked all the little white stars popping out at random. Link to comment Share on other sites More sharing options...
roky Posted November 19, 2006 Share Posted November 19, 2006 niiice Link to comment Share on other sites More sharing options...
fizeau Posted November 20, 2006 Author Share Posted November 20, 2006 Thank you all for the commendations, that´s what I´m slaving away for I toothink the magic was a little bit on the short side. I'm already back in myworkshop working frantically on the nessecary improvements. Technical datas: the drivers were 15 mm diameter, the propellant was BP (65%KNO3, 10% Hardwood charcoal, 10% Sulfur) and 5% Mg grit. Binder was 10% rubbersolution. I made a core burner about 6 mm and the nozzles were 4 mm diameter Link to comment Share on other sites More sharing options...
Recommended Posts