Peter8 Posted May 23, 2012 Share Posted May 23, 2012 Hi, I want to make my own high quality potassium chlorate. So, I want to construct a chlorate cell. I own the following items: 1.) Power Supply / Mean Well HRP-600-5 / 5.0V @ 120.00A = http://www.powergate...wer-supply.html 2.) MMO anode + titanium cathode / 2.8" X 5" size / custom made from Kurt Bjorn So I need to buy:1.) 5 foot, 4 AWG copper wire welding cable = http://www.ebay.com/...=item58938c6184 2.) 4 AWG Tinned Heavy Wall Lug 1/4 inch = http://www.ebay.com/...=item45f1e748d8 3.) Ampere Meter + Shunt / 100A , 50mV = http://www.ebay.com/...=item25700305b5 4.) Plastic container / Dimension: 6" x 6" x 10" = http://www.ebay.com/...=item4aa71c60af 5.) Potassium chloride 6.) Hydrochloric acid and a dropper 7.) Distilled water 8.) Glue to seal anode and cathode Questions:- What other items do I need to make a chlorate cell? - The power supply have a small trimmer potentiometer that allows adjustment between a narrow range.So, do I also need a voltmeter to set the output circuit to 5 volt? Here is one from the same vendor on ebay:http://www.ebay.com/...=item231b83a415 Thanks,Philipp Link to comment Share on other sites More sharing options...
Mahyar Posted January 7, 2015 Share Posted January 7, 2015 Hi philipp, I am also trying to produce chlorates. I know you may have already started since you posted this in 2012 but you are still struggling see this video to improve you cell. Link to comment Share on other sites More sharing options...
Recommended Posts