Jump to content
APC Forum

Some Rokets and one Girandola


Pyroboy

Recommended Posts

These are the rockets shot last weekend. The shells you can find here: http://www.amateurpy...nd-3-ballshell/

 

 

 

First of all our first try in building a girandola. we had two 18mm black powder propellants for the spin and six 22mm BP endburner for lifting. the second stage are four 16mm MgAlred core burner wich gave a interesting effect :D.

 

Girandola

 

 

We also made some MgAl fueled coreburners with some headers on them. sorted in green and red propellants.

 

green coreburners

 

red coreburners

 

The last three ones are a 22mm BP endburner, a 5/8inch hybrid coreburner and a 5/8 inch whistle with some headers on them.

 

 

BP endburner

 

hybrid

 

whistle

 

 

Sadly the camera did not catch the colours very well. The coloured stars were veline magenta, emerald green and beachle6 red.

Edited by Pyroboy
Link to comment
Share on other sites

Are there links missing or do I just not know how to operate my computer?
Link to comment
Share on other sites

You are right. Some links were missing, I edited it. Now you should find all the videos ;-).
Link to comment
Share on other sites

Thank you! The hybrid mix was 50 ppw whistle /(KClO4/ potassium benzoate + 1% Fe2O3) mixed with 50 ppw BP. The streamer was C6 (ballmilled) with 10% FeTi (0-1000µm) added.
Link to comment
Share on other sites

Those were some nice rockets ;)! What comp did you use for te red/green, and what tooling (sizes) did you use? Did you use some whistle increments to spice them up?
Link to comment
Share on other sites

×
×
  • Create New...