Rooster Posted January 22, 2006 Share Posted January 22, 2006 TheAlmightyVineMan: Here is my contribution. BTW, this is in a Guide setting, because I just copied and pasted from a report I did on it.Following these directions, you will end up with cut stars. They can be rolled or pumped I imagine, but I always cut mine. Vineman Aura Stars KNO3-75gSulfur-20gCharcoal-30gCopper(II) Chloride-50gDextrin-10g DescriptionBurns orange with blue/teal flashes and orange sparks. DirectionsTo make, powder all chemicals and mix with water into a paste, spread on wax paper and let it dry for 2+ days for full curing. Prime with BP. NOTE- Due to chlorine in the comp, the wax paper will turn yellow/green in some areas. Do not worry, as this is normal, so do not worry about it. Also, some chlorine gas will be released, this is normal also. Just make sure the area is well ventilated(example, dry outside). NOTE-DUE TO RAIN I HAVE NOT BEEN ABLE TO TEST IT IN THE AIR. ANYONE WILLING TO DO SO WOULD BE A GREAT HELP. +++++++++++++++++++++++++++++++++ 6C_the second: I ordered some copper chloride, so i'll try it and post some pics for ya. ++++++++++++++++++++++++++++++++++ 1 Link to comment Share on other sites More sharing options...
Zumber Posted September 20, 2010 Share Posted September 20, 2010 TheAlmightyVineMan: Here is my contribution. BTW, this is in a Guide setting, because I just copied and pasted from a report I did on it.Following these directions, you will end up with cut stars. They can be rolled or pumped I imagine, but I always cut mine. Vineman Aura Stars KNO3-75gSulfur-20gCharcoal-30gCopper(II) Chloride-50gDextrin-10g DescriptionBurns orange with blue/teal flashes and orange sparks. DirectionsTo make, powder all chemicals and mix with water into a paste, spread on wax paper and let it dry for 2+ days for full curing. Prime with BP. NOTE- Due to chlorine in the comp, the wax paper will turn yellow/green in some areas. Do not worry, as this is normal, so do not worry about it. Also, some chlorine gas will be released, this is normal also. Just make sure the area is well ventilated(example, dry outside). NOTE-DUE TO RAIN I HAVE NOT BEEN ABLE TO TEST IT IN THE AIR. ANYONE WILLING TO DO SO WOULD BE A GREAT HELP. +++++++++++++++++++++++++++++++++ 6C_the second: I ordered some copper chloride, so i'll try it and post some pics for ya. ++++++++++++++++++++++++++++++++++how to make stars if CuCl2 is hygroscopic. Link to comment Share on other sites More sharing options...
Ralph Posted September 20, 2010 Share Posted September 20, 2010 mix with water as instructed Link to comment Share on other sites More sharing options...
Recommended Posts