bogey1 Posted May 23, 2009 Share Posted May 23, 2009 before anybody flames me about salutes, i've been building ground/ariel salutes for over 7 years, but i haven't and wont get into the sulfur mix salute..anyway, i was at a show last year and the salutes they were launching weren't the typical bright white flash salutes, they were a deep red color salute. the sound was a deep thud, not a crack. my question is, what chemical make up was it? Link to comment Share on other sites More sharing options...
Ventsi Posted May 23, 2009 Share Posted May 23, 2009 (edited) There was a red flash thread somewhere around the forum .... Found it! -Red FlashThe sound in my expirience is a result of the casing - strong casing-sharp sound, weak casing [non spiked paper]- deep low thud.Hope I helped! Edited May 23, 2009 by Ventsi Link to comment Share on other sites More sharing options...
bogey1 Posted May 28, 2009 Author Share Posted May 28, 2009 There was a red flash thread somewhere around the forum .... Found it! -Red FlashThe sound in my expirience is a result of the casing - strong casing-sharp sound, weak casing [non spiked paper]- deep low thud.Hope I helped!thanks ventsi. i read the thread you posted but its a tad old and conflicting. i'll try to dig up more info. thanks again, bogey Link to comment Share on other sites More sharing options...
Recommended Posts