Jump to content
APC Forum

Need halp making a PCV pipe stand.


jointluver

Recommended Posts

Since this year I could not make any of my own fireworks (lack of ingredient) i bought a couple of rockets. I need a rocket stand for my rockets about 2 1/2-3 feet long. If you can tell me, or give me a URL to a guide please.

 

Thanks, have a Happy Fourth of July.

:)

Link to comment
Share on other sites

All you really need is a piece of pipe of roughly any size and bury one end in a bucket full of dirt. If you are buying the pipe and the rockets aren't insanely huge then buy some 1" ID pipe that is around a foot longer in length than your rockets. It is rocket science but not all that complex. Just stick a tube in the ground and light your rockets.
Link to comment
Share on other sites

I'd suggest something like a steel or aluminium pipe, PVC will melt from the hot exhaust.
Link to comment
Share on other sites

I use 3/4" metallic electric conduit. I cut one end at a 45 degree angle, like a giant hypodermic needle, and hammer that end into the ground. Unless you are sending up volleys, thats really all you need.
Link to comment
Share on other sites

×
×
  • Create New...