Bonny Posted June 4, 2008 Share Posted June 4, 2008 2-2inch mines. First is tigertail and veline blue second is veline red. All were 1/2" x 3/8" (cut) stars made in a light diffuser. Mortars were about 8" tall. Fired using my electric firing panel and homemade ematches. Quickmatched into the top, with match leading into stars not lift. Used a lifting disk of cardboard with 1/8" holes punched to allow flame to reach lift. Each mine had approx 40g stars and 10g of corned -4+10 willow BP lift. Link to comment Share on other sites More sharing options...
TheSidewinder Posted June 4, 2008 Share Posted June 4, 2008 Those were two VERY nice mines, Bonny. Good work! Link to comment Share on other sites More sharing options...
yellowcard Posted June 4, 2008 Share Posted June 4, 2008 Nice mines. I thought that to lift 40g of stars 10g lift should be overkill, but it's not that fast i think after i saw the vid.Very nice mines still . But i think that sound can get much better with faster bp. Link to comment Share on other sites More sharing options...
PyroMan LTU Posted June 4, 2008 Share Posted June 4, 2008 Thats some nice mines Link to comment Share on other sites More sharing options...
Bonny Posted June 4, 2008 Author Share Posted June 4, 2008 Nice mines. I thought that to lift 40g of stars 10g lift should be overkill, but it's not that fast i think after i saw the vid.Very nice mines still . But i think that sound can get much better with faster bp. I use coarse lift to get a nice thump and not destroy the stars rather than the bang I get when using -10+20. Link to comment Share on other sites More sharing options...
qwezxc12 Posted June 6, 2008 Share Posted June 6, 2008 Very nice!...I love the mix of blues with TT, C6/8 or Al streamers. Link to comment Share on other sites More sharing options...
Guest colizoli Posted June 8, 2008 Share Posted June 8, 2008 Well there's my next TO DO! Beautiful! Bonny, is it necessary to prime the Veline Stars? joe Link to comment Share on other sites More sharing options...
Bonny Posted June 9, 2008 Author Share Posted June 9, 2008 Well there's my next TO DO! Beautiful! Bonny, is it necessary to prime the Veline Stars? joe In mines that light the stars befor the lift, you MIGHT get away without priming, but I've never tried. I prime all my veline stars as I make them. I usually use 1 layer of "Veline style" prime and then a layer of meal or BP prime, depending on what's handy. I have left out the BP layer by accident, and they still worked though.Here is the prime I use for veline (and other perc stars): KClO4-62C-22MgAl (200M)-7Dextrin-4Al (dark)-3CuO-2+2 or 3 % woodmeal (I use sawdust 40mesh I think) Link to comment Share on other sites More sharing options...
Photon_Junkie Posted June 11, 2008 Share Posted June 11, 2008 Bonny,Very nice mines. I am working on 1.75" (2") set with Ruby Red and Wilbur's Blue stars. I will post when completed. Thank you for posting the lift and star weights, that gives me a good starting point that I can dial in the best amounts. You and I have the same ideas on BP. Thanks again for the post! Link to comment Share on other sites More sharing options...
Recommended Posts