Bju90 Posted May 8 Posted May 8 3/4” ID 10mm Nozzle Lump Green Bp base +5% “cold sparkular” Ti (comes from aliexpress) 25% by weight microstars red, D1 and crackle. att.oLwW4tjwmYl_x8-VxcDaJUd3B7PHnVPrKpZzYLVOv6M.mp4 D1 must have been washed out. The red formula i used was modified brilliant rubber stars formula substituting Sulfur as the fuel and dextrin as binder. It isn’t ideal but I may as well use it up. Other than that my family enjoyed it
Bju90 Posted May 8 Author Posted May 8 9 hours ago, dgsh009 said: Nice effects, does the comp contain perchlorate or chlorate based? Only Nitrates, perchlorate and chlorates aren’t available where I live.
dgsh009 Posted May 10 Posted May 10 On 5/9/2025 at 12:33 AM, Bju90 said: Only Nitrates, perchlorate and chlorates aren’t available where I live. Could you send your comp formula for me? thank you
Bju90 Posted May 10 Author Posted May 10 4 hours ago, dgsh009 said: Could you send your comp formula for me? thank you The red is the one I tested from this thread. I just replaced the red gum with Sulfur at the same 11% then added dextrin as a binder. I couldn’t get them to light as a mine or comet but they worked in the fountain ok.
Bju90 Posted June 20 Author Posted June 20 20mm Tube, 10mm Nozzle Milled 60/30/10 lump charcoal fuel 70% Red and crackle microstars 15% each IMG_3942.mov
Zumber Posted June 20 Posted June 20 1 hour ago, Bju90 said: 20mm Tube, 10mm Nozzle Milled 60/30/10 lump charcoal fuel 70% Red and crackle microstars 15% each IMG_3942.mov Another good one...!!
Recommended Posts