Jump to content
APC Forum

Recommended Posts

Posted

Congratulations those are really nice shells..!!

Burst was very perfect and stars spread well, spolette is also very nice; I can clearly see that you have used same prime composition as you have used for willow/ niagarafall type effect. Stars also has survived flash burst and ignited well due to that prime.

One suggestion is you have to work on willow star composition the last two video you have posted. You have to modify it it is not leaving sparks and hence trail is not clear.

Good luck 🤞 

Posted

@Zumber

I have used this composition for the streamer in last two videos. Pumped the stars into 10/10mm. 

KNO3-32

AFC-39(Milled one you know what I mean)

S-10

FeTi-10

Dextrine-8

Pumped with 50/50 Water/Alcohol

Do you suggest any better composition for a longer bushy tail?

Posted
23 hours ago, SKC said:

@Zumber

Do you suggest any better composition for a longer bushy tail?

Bright ( with metal like titanium) Charcoal streamer or Tiger tail with Metal is good choice.

  • 2 weeks later...
Posted

If you want a longer, bushier tail you may want to consider replacing some of your airfloat charcoal with coarser charcoal or maybe using lampblack. Experimenting with the variety of charcoal may also help. If you have local wood available that is somewhat sticky or has a lot of sap or sugar, it might give a longer lasting tail. Any of my recommendations probably wouldn't be applicable for your part of the world.

×
×
  • Create New...