MrBOOMbastic Posted September 21, 2022 Share Posted September 21, 2022 Would it work if I primed the end of some quick match with nitrocellulose/pot aluminum mixture for an ap based go getter ? Link to comment Share on other sites More sharing options...
cmjlab Posted September 23, 2022 Share Posted September 23, 2022 What do you mean by "pot aluminum"? If you have some AP go-getters made you could try the NC lacquer, Ive not read anywhere else of anyone trying that. Could be a simple and effective way to use regular blackmatch for the AP slurry gogetters. I'd be interested in your results. I've only tried AP go-getters once, and used a KClO4 based thermalite imitation fuse as my fusing method. It didn't work well, mainly because the fuse sucked! Charles 1 Link to comment Share on other sites More sharing options...
cmjlab Posted September 23, 2022 Share Posted September 23, 2022 In hindsight, I'd wonder if just plain blackmatch coated in NC lacquer only, would be enough to protect the AP from the KN03 in the fuse. Link to comment Share on other sites More sharing options...
MrBOOMbastic Posted September 23, 2022 Author Share Posted September 23, 2022 Mix of KClO₄/ aluminum and NC lacquer figure it would burn hot for reliable ignition.. obviously just want to protect the AP from the potassium nitrate Link to comment Share on other sites More sharing options...
cmjlab Posted September 24, 2022 Share Posted September 24, 2022 Mix of KClO₄/ aluminum and NC lacquer figure it would burn hot for reliable ignition.. obviously just want to protect the AP from the potassium nitrateGotcha, thanks. Link to comment Share on other sites More sharing options...
Recommended Posts