ronmoper76 Posted March 19, 2021 Share Posted March 19, 2021 (edited) Do any of you guys use SGRS as a binder with rice hulls? Does it have much effect on slowing it down.,i'm not trying to overdo it with binders I noticed adding about 2% makes everything stick to my hulls like glue and stay that way even after handling it quite a bit. I was having a issue with it not being able to be handled much or i would end up with 1lb of powder at the bottom of a 10lb bag when it was finished..I read that some binders aren't good for certain compositions,BP being one,supposedly dextrin is used mostly for a reason. I swap out red gum often for phenolic resin and sometimes i have done the same for dextrin... I can't get the dextrin to hold good enough at 5% and how much does dichromate really aid in decomp of perchlorate,is it only applicable in certain formulas or can it benefit any composition rich on perchlorate? Edited March 19, 2021 by ronmoper76 Link to comment Share on other sites More sharing options...
Recommended Posts