Jump to content
APC Forum

Pyro Activity in Lockdown situation!


BengalFlair

Recommended Posts

We are in containment zone so fully locked down right here and having lots of free times so making some newspaper hemisphere as no availability of paper hemisphere locally and also making some micro stars with my homemade micro star plate for core or use in multi-colour fountains. I would like to share the videos with you.

 

  • Like 1
Link to comment
Share on other sites

Good plan! There are lots of inert pieces to make before you get to ingredients, which all need to be prepared (size etc), before you make mixtures and compounds.

Link to comment
Share on other sites

Whatever deity you choose... bless the pyro spirit :)

Link to comment
Share on other sites

I have always enjoyed your videos. Please continue in making them, and thank you very much................Pat

Link to comment
Share on other sites

The use of a silicone mat is nothing new it was discussed on pyro gear years ago music sucks!

Link to comment
Share on other sites

Yes!! All that things are not new although we are still discussing with gunpowder "occurred in the 9th century AD during the Tang dynasty in china"!!

  • Like 2
Link to comment
Share on other sites

Yes!! All that things are not new although we are still discussing with gunpowder "occurred in the 9th century AD during the Tang dynasty in china"!!

 

touche’ :D

  • Like 1
Link to comment
Share on other sites

Yes!! All that things are not new although we are still discussing with gunpowder "occurred in the 9th century AD during the Tang dynasty in china"!!

 

Great point, and for what it's worth, I liked the music! :D

Link to comment
Share on other sites

Thanks to all you guys for your great comments :)

I (and I think, a lot of guys also) don’t have any idea about pyro gear’s silicone mat technique as I have never seen it. I made my star plate more than 10 years ago and I’m still using it. Here’s a video of a shell made by me posted on Aug, 2011 in which red and green stars were made with this star plate.

 

Link to comment
Share on other sites

Yes!! All that things are not new although we are still discussing with gunpowder "occurred in the 9th century AD during the Tang dynasty in china"!!

I enjoy your videos. I watched 2 of them last night. Being creative and trial and error is learning, which we all do. Keep up the good work and do what you enjoy doing.

Link to comment
Share on other sites

BengalFlair, how many layers of newsprint do you usually use for your hemi's? How long do you let them dry? Thanks for the videos it's always enjoyable to see how pyro is done in other parts of the world.
  • Like 1
Link to comment
Share on other sites

I usually use six layers and in these summer days it takes around two hours to fully dry in bright sun. :)

Link to comment
Share on other sites

  • 5 months later...

It is made with a 14” square bakelite sheet around 3 mm thick which is usually used for electrical switch board right here and the pins are 1/8” aluminium rivets. There are 9 groups of holes and total number is 1638.

I first marked and drilled the small sheet with a 1/8” drill bit which contains pins and used the drilled small sheet as a drilling guide for the whole of the14” square bakelite sheet. I fixed the aluminium rivets with epoxy glue aligning them through the hole of both sheets.

Link to comment
Share on other sites

  • 1 month later...
I'm just now finding myself getting into making stars. I've dabbled here and there with other various fireworks, but havent made my own stars yet (materials are on order!). Love your star plate idea. Once I get the hang of it, I may need to put something like that together. Seems to work very well and much quicker than cut stars, which I'll be starting with.
Link to comment
Share on other sites

Keep it simple. Start with cutting, its cheaper, faster, easier, reliable. Little pumped stars for 1-3/4" shells, will be more effort than their worth. And, it's a good skill to be proficient at. Edited by Carbon796
Link to comment
Share on other sites

  • 4 weeks later...

Does anyone know of an amateur pyro club or group in western pa?

A simple google reveals.. https://www.crackerjacks.org

Edited by Richtee
Link to comment
Share on other sites

Crackerjacks seems to be more for displays. I was looking for a PA group that focused on making smaller hobby fireworks. The only one that seems it might fit the bill that i can find is mid atlantic pyrotechnic arts guild. They seem to focus on building fireworks, and maybe thats the group i need to look into, i was just wondering if anyone had encountered western PA people or groups doing the same sort of thing.
Link to comment
Share on other sites

×
×
  • Create New...