Jump to content
APC Forum

Crossets


Piccaso

Recommended Posts

Ok I was reading an article on crossetes and there was a mention of including pistol primers in them. What would be the purpose of this? I like to fully understand exactly what I am doing before I try it in any way. This was an area I was planning on visiting when I could afford more tooling but since I just bought a bunch a star pumps and plates from Caleb I have blown the pyro budget for this month.

Edited by Piccaso
Link to comment
Share on other sites

That was me. I've used the pistol primers for every crossette shell and they work perfectly every time. I've only done a few though. Gurus have declined to try it, so nobody else has either. It's not so much about the ideas we have, as who we are when we have them ;)

Here's a link to the 'tools':

http://pyrobin.com/files/toy%20crossette%20loading%20tools.JPG

 

Here's a video of me loading the crossettes:

http://pyrobin.com/files/loading%20crossette.avi

 

Here's the shell using those crossettes in action:

http://pyrobin.com/files/Swisher%20crossette%20willow.MOV

 

I believe the pistol primers help the crossettes crack with good timing, because they all heat up with good timing due to the thermal conductivity of the metal. Big words for something simple. They work just as well as the much more labor-intensive 'approved' methods.

 

EDIT: I'd be surprised if somebody mentioned using pistol primers for crossettes in an article. What article mentioned it?

Edited by justvisiting
  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...