MinamotoKobayashi Posted September 29, 2019 Share Posted September 29, 2019 (edited) Hi dudes.Finally I was able to make nice dragon eggs!First of all, here is a 6" shell containing green fade red stars and some dragon eggs mixed between the coated rice hulls.The shell was powered with my classic granulated r-candy mix nozzleless rocket in an aluminun case pressed at 7000 PSI: https://youtu.be/5f3bJemK0bs 5" inches shell containing Jopete's Kamuro stars strobe core powered by a 25,4x250mm carboard case containing r-candygranulated mix pressed at 7000 PSI: https://youtu.be/DMFSaKFo1XQ 4 inches shell containing a lot of 3mm dragon eggs powered by a 25,4x150mm carboard tube containing granulated r-candymix pressed at 7000 PSI.The stars were mixed between the burst charge (granulated overmilled hot BP plus some grams of overmilled KP at the center),so the stars spread was not simmetric, but nice anyway: https://youtu.be/BOECD-uUteM Edited September 29, 2019 by MinamotoKobayashi 1 Link to comment Share on other sites More sharing options...
memo Posted September 29, 2019 Share Posted September 29, 2019 looking good Link to comment Share on other sites More sharing options...
dlking59 Posted September 30, 2019 Share Posted September 30, 2019 Nice work. They look real good. Link to comment Share on other sites More sharing options...
memo Posted October 1, 2019 Share Posted October 1, 2019 what size were the stars in the kamaro heading ? Link to comment Share on other sites More sharing options...
kingkama Posted October 3, 2019 Share Posted October 3, 2019 Nice work, try to add granulated crackling mix to a kamuro composition and press into comet 1.5 x 3.5 cm. Anyway cool rockets. Link to comment Share on other sites More sharing options...
Recommended Posts