Fulmen Posted February 25, 2019 Share Posted February 25, 2019 Never underestimate the appeal of an elegant and totally unnecessary solution. Link to comment Share on other sites More sharing options...
Col Posted February 25, 2019 Share Posted February 25, 2019 Aye, but its a one trick pony. A modded drill press can be used to trim hemi`s, cut tubes to length and drill holes in stuff Link to comment Share on other sites More sharing options...
dlking59 Posted February 27, 2019 Share Posted February 27, 2019 a bandsaw works nice for cutting tubes Link to comment Share on other sites More sharing options...
dagabu Posted February 27, 2019 Share Posted February 27, 2019 My 1.5", 2", 3", 4", 5" 6" and 8" are all pressed to the final shape, there is no sign of trimming. Each layer is a tiny bit offset, no sign of a blade and in those videos, the circular hemisphere cutout should make a "perfect" half. They are all Chinese made, no Japanese hemis. Link to comment Share on other sites More sharing options...
Arw Posted March 20, 2019 Author Share Posted March 20, 2019 (edited) Thanks you allivars21 style 2 work well for my 2.7" moldhttps://pyrodata.com/hemis.phpbut its need to trimThanks again Edited March 20, 2019 by Arw 1 Link to comment Share on other sites More sharing options...
Juanma9410 Posted January 8, 2021 Share Posted January 8, 2021 Hello, does anyone know what type of glue they use? Link to comment Share on other sites More sharing options...
davidh Posted January 9, 2021 Share Posted January 9, 2021 The glue is probably heat activated. The molds look like they may be heated. 1 Link to comment Share on other sites More sharing options...
Recommended Posts