Jsefcik4958 Posted October 21, 2018 Share Posted October 21, 2018 Hey guys hope your days have been well... question for ya, my salutes arent giving a good enough report as id like what are some things i can add or change to get a better report:) ??? Link to comment Share on other sites More sharing options...
Tim1877 Posted October 21, 2018 Share Posted October 21, 2018 What are you using for your reports comp,confinement Link to comment Share on other sites More sharing options...
Jsefcik4958 Posted October 22, 2018 Author Share Posted October 22, 2018 Like what chemicals? And confinment as in tube size and plugs? Link to comment Share on other sites More sharing options...
spectra1 Posted October 22, 2018 Share Posted October 22, 2018 Yes to both questions. What is the composition you are using? That is kind of critical if we are to help you improve something. Link to comment Share on other sites More sharing options...
FrankRizzo Posted October 22, 2018 Share Posted October 22, 2018 Two simple things: Spike your casing with a nice cotton twine, and tie some blackmatch to the fuse inside the casing. The first part addresses confinement and the other helps to increase the ignition speed. 1 Link to comment Share on other sites More sharing options...
Jsefcik4958 Posted October 22, 2018 Author Share Posted October 22, 2018 (edited) Im using a mix of 70 potassium percorlate and 30 dark german aluminum 2.5 inch tube 3/32 wall with red plugs but i cut the plugs down a bit and push them in the tubing a bit and i push the fuse into the red plugs, and glue one side in with epoxy, wait till it drys then flip it , Edited October 22, 2018 by Jsefcik4958 Link to comment Share on other sites More sharing options...
Jsefcik4958 Posted October 22, 2018 Author Share Posted October 22, 2018 Also frank im not to sure what you mean by spiking it with a cotton twine, can you explain a little bit thanks man Link to comment Share on other sites More sharing options...
Tim1877 Posted October 22, 2018 Share Posted October 22, 2018 No one on here is going to give you advice on how to make an illegal m80 which is what you're asking for Link to comment Share on other sites More sharing options...
Richtee Posted October 23, 2018 Share Posted October 23, 2018 (edited) No one on here is going to give you advice on how to make an illegal m80 which is what you're asking for And if you can’t make that work, take up BBQ or something else for all our good Edited October 23, 2018 by Richtee 1 Link to comment Share on other sites More sharing options...
Recommended Posts