GermanPyro Posted September 19, 2017 Share Posted September 19, 2017 (edited) Hello pyros, fresh from my pyro manufactur: Edited September 19, 2017 by GermanPyro Link to comment Share on other sites More sharing options...
Sulphurstan Posted September 19, 2017 Share Posted September 19, 2017 German, the comp you used was classic 70-30 flash with sponged Ti? Link to comment Share on other sites More sharing options...
GermanPyro Posted September 20, 2017 Author Share Posted September 20, 2017 Hi Pyromaniac, here the formula, calculated for 1kg, the single shot bullet was charge with 100g. KClO4, fine powdered: 583,33gAluminium, pyro dark (Eckard 5413): 250gTitanium T3 (450-1000my): 166,67g Link to comment Share on other sites More sharing options...
PeteyPyro Posted September 20, 2017 Share Posted September 20, 2017 Looks a lot like my 70/30 +15% Ti salute comp ✴✴✴ Link to comment Share on other sites More sharing options...
GermanPyro Posted September 20, 2017 Author Share Posted September 20, 2017 Hi Pete, I use 20% Ti Link to comment Share on other sites More sharing options...
PeteyPyro Posted September 20, 2017 Share Posted September 20, 2017 GP, What is the upper limit of Ti sponge that you've tried? Ti here in the USA isn't cheap, so I often try for as little as I can get away with, and still have a good show of sparks. Link to comment Share on other sites More sharing options...
GermanPyro Posted September 21, 2017 Author Share Posted September 21, 2017 30%, but with 20% you have the best results from my point of view. 20% is also the maxium of Ti, what I use inside my SFX driver for gasoline mines and flour mines. Link to comment Share on other sites More sharing options...
Recommended Posts