dynomike1 Posted January 3, 2018 Share Posted January 3, 2018 Time to move on to 5". 1 Link to comment Share on other sites More sharing options...
fckiamdead Posted January 4, 2018 Author Share Posted January 4, 2018 Time to move on to 5". I shot some 6 inch but they went very high so the clouds took em ;(I have a film whit one where i did a huge misstake... i put Independence red stars (ring) along whit a streamer effect.. you can only see the red in the clouds/mist. Very dumb decision Here´s some more 3 inch... Link to comment Share on other sites More sharing options...
rogeryermaw Posted January 4, 2018 Share Posted January 4, 2018 man! some fine work in these shells! crisp color changes, multiple effects and all crammed in 3 and 4 inch shells...that was impressive Link to comment Share on other sites More sharing options...
burningRNX Posted January 4, 2018 Share Posted January 4, 2018 Verry Nice shells F*Imdead!, its amazing to see that much effect in 3" How did you screen them? did you dry them before screening? or did you roll them to the size / screening them between increments?Compositions?layer thickness of collor?total star diameter? Link to comment Share on other sites More sharing options...
calebkessinger Posted January 5, 2018 Share Posted January 5, 2018 Some people just "got it" what a show man. Link to comment Share on other sites More sharing options...
fckiamdead Posted January 5, 2018 Author Share Posted January 5, 2018 (edited) Verry Nice shells F*Imdead!, its amazing to see that much effect in 3" How did you screen them? did you dry them before screening? or did you roll them to the size / screening them between increments?Compositions?layer thickness of collor?total star diameter?HelloThanks I use a small lead core to roll on. Sort them whit this homemade good looking device (roll maybe 3mm each time then dry and repeat)The latest film is Spanish fuschia and plain BP meal whit 10% FeTi, very thin layer of BP+si prime. ( I always use a very thin layer of prime to get more composition place) The one to the left is Fuschia and the other one is the blue/Red from a video in this thread.Couldn´t break them 100% in half.. Edited January 5, 2018 by fckiamdead 1 Link to comment Share on other sites More sharing options...
fckiamdead Posted January 10, 2018 Author Share Posted January 10, 2018 3inch whit BP+10% FeTi stars Link to comment Share on other sites More sharing options...
OldMarine Posted January 10, 2018 Share Posted January 10, 2018 Good stuff! Link to comment Share on other sites More sharing options...
dynomike1 Posted January 11, 2018 Share Posted January 11, 2018 Didnt see anything wrong there. 1 Link to comment Share on other sites More sharing options...
fckiamdead Posted January 11, 2018 Author Share Posted January 11, 2018 4 inch Chrys 6 Link to comment Share on other sites More sharing options...
fckiamdead Posted January 13, 2018 Author Share Posted January 13, 2018 2inch peanut shells whit mines. Link to comment Share on other sites More sharing options...
dynomike1 Posted January 14, 2018 Share Posted January 14, 2018 You dumping stars on top of the shells? Link to comment Share on other sites More sharing options...
OldMarine Posted January 14, 2018 Share Posted January 14, 2018 Nice effect regardless. Link to comment Share on other sites More sharing options...
fckiamdead Posted January 19, 2018 Author Share Posted January 19, 2018 3inch BP/FeTi to red 1 Link to comment Share on other sites More sharing options...
fckiamdead Posted January 27, 2018 Author Share Posted January 27, 2018 4inch some failing stars... Link to comment Share on other sites More sharing options...
fckiamdead Posted April 1, 2018 Author Share Posted April 1, 2018 An attempt to make a cylinder shell whit timed reports. 3pc of timed rising effects. BP/FeTi "ring" 1 Link to comment Share on other sites More sharing options...
dynomike1 Posted April 1, 2018 Share Posted April 1, 2018 I cant ever get my inserts to go off at the same time. Link to comment Share on other sites More sharing options...
fckiamdead Posted April 2, 2018 Author Share Posted April 2, 2018 2inch peanut shell, Glitter. Link to comment Share on other sites More sharing options...
fckiamdead Posted April 2, 2018 Author Share Posted April 2, 2018 I cant ever get my inserts to go off at the same time.I made a time fuse cutter, works great! Link to comment Share on other sites More sharing options...
dynomike1 Posted April 2, 2018 Share Posted April 2, 2018 I have a fuse cutter and still cant get em to go off at the same time. Link to comment Share on other sites More sharing options...
MrB Posted April 3, 2018 Share Posted April 3, 2018 I use a cutter, and have done both punched through timefuse, with a strand of BM in the hole, dipped i NC / BP slurry, and tied, bent over the end, BM. For me, no doubt the best results were with punched hole for the BM, followed by NC / BP slurry, and last... well. It's just down to how consistent you can be, and that of course also applies to the timefuse. If it isn't consistent, then nothing else will be either. Link to comment Share on other sites More sharing options...
rocketmaster Posted April 20, 2018 Share Posted April 20, 2018 @fckiamdead what sort of machine are you using to roll your stars? Picture? Link to comment Share on other sites More sharing options...
fckiamdead Posted April 21, 2018 Author Share Posted April 21, 2018 @fckiamdead what sort of machine are you using to roll your stars? Picture?HelloI can take some pictures tomorrow for you. Regards Link to comment Share on other sites More sharing options...
fckiamdead Posted September 26, 2018 Author Share Posted September 26, 2018 An attempt on making a red horsetail cylinder "smoke" shell Yes there is a tail...but kind of small one.. the bang was nice though... you have to start somewhere... Link to comment Share on other sites More sharing options...
Recommended Posts