ddewees Posted June 5, 2016 Share Posted June 5, 2016 1 Link to comment Share on other sites More sharing options...
FlaMtnBkr Posted June 5, 2016 Share Posted June 5, 2016 He didn't have the nerve to crank away on hydraulic jack against the water jet head while it was cutting to see which failed first? I probably wouldn't either on a $150k+ machine. Link to comment Share on other sites More sharing options...
OldMarine Posted June 5, 2016 Share Posted June 5, 2016 I just spent 2 hours watching guys cut things in half and crush things in a press. Good times! 1 Link to comment Share on other sites More sharing options...
Maxim Posted June 6, 2016 Share Posted June 6, 2016 What water pressure was that?! Link to comment Share on other sites More sharing options...
dagabu Posted June 6, 2016 Share Posted June 6, 2016 "Uses a high velocity stream of Ultra High Pressure Water 30,000–90,000 psi (210–620 MPa) which is produced by an intensifier pump with possible abrasive particles suspended in the stream." -WP Link to comment Share on other sites More sharing options...
Recommended Posts