zheneck222 Posted May 17, 2015 Share Posted May 17, 2015 http://www.youtube.com/watch?v=VF8HnQumHvQ One - 3 inch shellTwo - 3 inch shellFour- 4 inch shellFive- 4 inch shellSix - 4 inch shell All Five salutes from 9may 9 may !!! Day of Victory in Russia Federation !!! 1 Link to comment Share on other sites More sharing options...
Andres1511 Posted May 17, 2015 Share Posted May 17, 2015 (edited) Where is number three ? . Some shells might be a bit low, and the 3inch shells didn't break even.The 4 inch shells are nice, that power !Very nice colours tough, surely the aqua ! Maybe share the comp ? Edited May 17, 2015 by Andres1511 Link to comment Share on other sites More sharing options...
GMetcalf Posted May 17, 2015 Share Posted May 17, 2015 You seem to be standing very close to those mortar tubes... The stars are practically falling on your head! Maybe for the sake of safety, run a bit further next time... Very nice shells! The four inch definitely broke more even. I also really like those pink stars! Are these cylinder shells? Link to comment Share on other sites More sharing options...
braddsn Posted May 18, 2015 Share Posted May 18, 2015 Nice shells! Very nice colors too! The Aqua, Pink, and Yellow are awesome!! Link to comment Share on other sites More sharing options...
zheneck222 Posted September 14, 2015 Author Share Posted September 14, 2015 4 inch shell http://www.youtube.com/watch?v=cb6V1qRECig and 3 inch shell http://www.youtube.com/watch?v=BWXBxtma_5w Link to comment Share on other sites More sharing options...
Maxim Posted September 17, 2015 Share Posted September 17, 2015 This strange fealing...when you know what zheneck done in the past few years...he was trolling the whole russian pyro forum for about 3 years... one of his shells bumed right above a building abd could coase a fire.... Link to comment Share on other sites More sharing options...
Livingston Posted September 17, 2015 Share Posted September 17, 2015 Very good my friend... you make ball or canister shell? Link to comment Share on other sites More sharing options...
zheneck222 Posted September 17, 2015 Author Share Posted September 17, 2015 4 inch is ball shell 3 inch canister shell 1 Link to comment Share on other sites More sharing options...
zheneck222 Posted September 18, 2015 Author Share Posted September 18, 2015 3 inch blankley-red http://www.youtube.com/watch?v=fSeThJmf7Zk 1 Link to comment Share on other sites More sharing options...
zheneck222 Posted February 1, 2016 Author Share Posted February 1, 2016 (edited) Dear American colleagues help please for my hobby the small sum of $, how many you can... I need to buy a form a matrix for pressing of stars... I have no money because I am the poor student Edited February 1, 2016 by zheneck222 1 Link to comment Share on other sites More sharing options...
FloridaCracker Posted February 1, 2016 Share Posted February 1, 2016 Really? Link to comment Share on other sites More sharing options...
memo Posted February 1, 2016 Share Posted February 1, 2016 ha ha , yup Link to comment Share on other sites More sharing options...
zheneck222 Posted February 1, 2016 Author Share Posted February 1, 2016 Okay (( 1 Link to comment Share on other sites More sharing options...
zheneck222 Posted February 3, 2016 Author Share Posted February 3, 2016 30 Euro cost this pressform ... 1 Link to comment Share on other sites More sharing options...
TheGandalf Posted February 3, 2016 Share Posted February 3, 2016 Link! ^^ Link to comment Share on other sites More sharing options...
memo Posted February 3, 2016 Share Posted February 3, 2016 here we are Link to comment Share on other sites More sharing options...
MrB Posted February 3, 2016 Share Posted February 3, 2016 I'm of course not sure, but i THINK the link requested was for the starplate. Not for the picture of deadbeat who makes em, so he can get some new clippers to cut his facial hair... Truth be told, i think he already has a pair of clippers, and rent them out to a barber shop...B! Link to comment Share on other sites More sharing options...
OldMarine Posted February 4, 2016 Share Posted February 4, 2016 WTF has happened to this thread?I leave for a minute and y'all drag in a Russian wino!Hehe, I'm still trying to decipher the stuff. Link to comment Share on other sites More sharing options...
zheneck222 Posted February 4, 2016 Author Share Posted February 4, 2016 (edited) http://s020.radikal.ru/i708/1602/48/dbb186364981.jpg 2000 rub ~ 30 euro, give pls me 30 euro Edited February 4, 2016 by zheneck222 1 Link to comment Share on other sites More sharing options...
memo Posted February 4, 2016 Share Posted February 4, 2016 and again Link to comment Share on other sites More sharing options...
lloyd Posted February 4, 2016 Share Posted February 4, 2016 You could MAKE your own plate for about 5 Euro. Just skip that next bottle in favor of a new pyro tool! (And THAT plate is so badly done, I wouldn't pay 5 Euro for it! Dang! Has the maker no PRIDE?) LLoyd Link to comment Share on other sites More sharing options...
Davidg1 Posted February 4, 2016 Share Posted February 4, 2016 You could MAKE your own plate for about 5 Euro. Just skip that next bottle in favor of a new pyro tool! (And THAT plate is so badly done, I wouldn't pay 5 Euro for it! Dang! Has the maker no PRIDE?) LLoydAgreed Lloyd. They are rubbish. Use anything other than hand pressure and they split Link to comment Share on other sites More sharing options...
zheneck222 Posted February 4, 2016 Author Share Posted February 4, 2016 http://i1322.photobucket.com/albums/u573/FUTORKA/IMG_3723_zps6f8f2091.jpg There is still here such, too a price of 30 euros 1 Link to comment Share on other sites More sharing options...
lloyd Posted February 4, 2016 Share Posted February 4, 2016 Look, before I 'call' you on pure ерунда, let me say this: IF you have the manual and technical skills to make aerial shells, you have the basic manual skills to make some rudimentary tools, also. No pyro worth his salt is ever satisfied with a tool until he's made it himself to his own specifications. Then it's 'perfect' (even if poorly made). So, make a darned star plate, and stop begging! Pyro makes us ALL poor. Join the club! Lloyd 1 Link to comment Share on other sites More sharing options...
zheneck222 Posted February 4, 2016 Author Share Posted February 4, 2016 (edited) okay I tried to make the press form, at me it didn't turn out... I very long tried... but left nothing = ((((( Edited February 4, 2016 by zheneck222 1 Link to comment Share on other sites More sharing options...
Recommended Posts