Jump to content
APC Forum

Flash powder safety


Vrizla

Recommended Posts

Hi everyone it's been a while since I've been on, too busy with my job. I have completed most of all the projects on turbo pyro and had a blast doing it. (Pardon the pun lol) I want to start experimenting with shells with a flash report. I am only going to make 1 gram at a time 70/30 perchlorate aluminum using the diapering method. Supposedly echart 5413 HS is the king of flash, but I have read lots of safety information on making flash, and some of the material says that flash powder made with single micron aluminum is dangerous. That it is sensitive to static and impact can degrade over time and spontaneously combust. Can someone elaborate on the subject and tell me which information is true. Also I have read that lye is used in paper production. Could there be enough of a trace left over in paper to contaminate my flash? Is there special paper that should be used for diapering Edited by Vrizla
Link to comment
Share on other sites

Virzla,

 

Let me take a page right from Passfire in dealing with the same subject earlier today. This is from Ned Gorski, one of the most respected names in amateur pyrotechnics today:

 

"what is the strongest and safest flash to make

Jeff

 

 

Jeff, sort of like "military intelligence" or "jumbo shrimp", you've come up a somewhat self-contradictory mixture of notions,,an oxymoron.

The "strongest" flash would more than likely be one of the more dangerous to make.

The "safest" flash would more than likely be pretty weak.

 

And, in fact, you've asked about a pyro mixture which is itself a contradiction in terms: flash powder is about the simplest and easiest of fireworks creations, being only a simple dry mixture of chemicals. And flash is about the most powerful and most dangerous of the common fireworks mixtures some of us work with.

More than a few of us still steer clear of working with it, it can make folks so nervous to work with.

Flash powder can ruin your life in an instant.

 

And, you do not need flash powder to dabble creatively in the pyrotechnic arts, although for many of us, salutes and flash powder are some of the first things we are drawn to, and interested in learning about.

 

So, it would be hypocritical of us to 'judge' you for asking your question, but knowing what we know, it would be irresponsible to answer you completely honestly.

 

You've walked up to a bunch of creative fireworks hobbyists, for whom flash is a mildly interesting addition to some pyro devices, but also for whom the more creative and scientific and artistic aspects of this art call our name much louder.

 

You've walked up and asked this group the One question many young, curious, but not very pyro-educated, and perhaps even irresponsible, kids, who are sometimes referred to as Kewl-Bomerz, would ask. It might be one of the first questions many of us would have asked once upon a time, though, so you Might be worth a bit of indulgence.

 

In this group, it would be considered completely irresponsible to answer your question completely honestly, but it might also be irresponsible to send you on your way with a somewhat hypocritical, gruff, rebuff. That might just send you looking somewhere else, only to get into trouble. There's a huge amount of bad info out there on the internet and elsewhere.

 

So here goes. You might consider, if you are truly curious about this fireworks art, strolling up and listening for a bit.. Maybe asking a few curious and respectful qustions. You Might be worth some respectful answers. We don't know that, though, so we'd be careful with you.

 

There is no safe flash powder. If you hear of any formulas which use chlorate, avoid them. If you hear of formulas which have more than two ingredients in a ratio of about 7/3, avoid them. Don't mix anything you don't definitely have some good info on. Don't do anything that someone you respect hasn't OK'd, and coached you on. There are relatively less-dangerous flash powders, and ones which can go off if you rub them the wrong way. There are ways to mix flash which are relatively less dangerous, and ways to mix it which are pretty much guaranteed to risk setting it off.

 

And in the end, flash is about the most powerful, most dangerous, easiest to make, easiest to get into trouble with, most on the edge of the law, most impressive at a gut level, least impressive on an artistic level, stuff in pyro.

 

If this scares you out of here, that's good.

If this invites you in here with the right attitude, good.

Mostly don't do anything you don't really know much about, don't hurt yourself, don't ask us to violate principles which we consider to be very important, and don't cast a bad light on an art which is tough enough to maintain in our society as it is..

 

Maybe more of an answer than you bargained for,,maybe just the one you need.

ned"

  • Like 6
Link to comment
Share on other sites

Any flash is dangerous! 5413 is an excellent grade of aluminum for flash! When you make flash with quality Potassium perchlorate and 5413 super H aluminum it will be storage stable. It will not spontaneously combust, unless you added something else or got it wet. It IS static sensitive, as well as impact sensitive. Don't worry about the paper, just use a big enough piece. Clean up spills of flash immediately!

 

I always spray myself, tubs and paper with anti-static spray before making flash powders.

Link to comment
Share on other sites

I think the other members have told you enough. There is no safe flash powder. There are differences between reactivity, sensibility and energy output between every mix. You should choose the best suitable for you. As for me, I'm very satisfied with the 5:3:2 nitrate flash. Maybe it won't work for crossettes, but it's ideal for small shells and salute inserts.
Link to comment
Share on other sites

I know there is no safe flash. I am respectful and fearful of it and all other pyrotechnic mixtures. I was just wondering if5413 HS is less stable then otheraluminum. Edited by Vrizla
Link to comment
Share on other sites

I don't think any type of quality produced aluminum will make flash any more dangerous than another from an impact or static perspective as long as you're using 7/3. It may be more dangerous in the sense that if it does go off, it will cause more damage, but that is about it. Given that, it certainly wouldn't make me any more uneasy about using it.

 

It sounds like you've done your homework and have at least a stable basis. I still recommend 7/3 perc/Al over a nitrate based one. The nitrate ones have their uses for boosting and slower flashes, but for smaller salutes or crossettes, I think the nitrates just don't fit the bill.

 

I also highly second Al's suggestion of the anti-static spray. It is sold in the laundry isle at the store. Static Guard is a common brand. Between it, and all cotton clothing, it is one of the cheapest precautions you can make. Watch the relative humidity too. Some people recommend making flash with at least 60%. Early morning is usually pretty wet FYI, plus you'll be the most careful and mentally sharp.

Link to comment
Share on other sites

I take a page right from Alberts play book (little Big Shots) and dump a quart of water on my concrete shop floor before I start work. The humidity reaches the comfortable lever within minutes and no static at all.

 

D

  • Like 3
Link to comment
Share on other sites

Hi everyone it's been a while since I've been on, too busy with my job. I have completed most of all the projects on turbo pyro and had a blast doing it. (Pardon the pun lol) I want to start experimenting with shells with a flash report. I am only going to make 1 gram at a time 70/30 perchlorate aluminum using the diapering method. Supposedly echart 5413 HS is the king of flash, but I have read lots of safety information on making flash, and some of the material says that flash powder made with single micron aluminum is dangerous. That it is sensitive to static and impact can degrade over time and spontaneously combust. Can someone elaborate on the subject and tell me which information is true. Also I have read that lye is used in paper production. Could there be enough of a trace left over in paper to contaminate my flash? Is there special paper that should be used for diapering

 

 

Vrizla,

 

I think Ned said it best. As far as Flash powder goes, the dangers and risks outweigh the benefits. If your going to make a safe flash powder use 7/3 Kclo4 and 5413H Al. You can also use Indian blackhead which is just as good.As for finding Al which is 1 micron, good luck. As far as I know the military uses 1 micron Al.and is hard to obtain unless you know someone. The 5413H is 3 micron porous flake and the Indian Blackhead is 2 to 3 if I'm not mistaken. When I make my flash powder I usually steal my wifes static guard and spray myself with it. Also make sure your working in an clean envirnement where is no source of ignition using the diaper method.If your going to store it, I store mine in an antistatic bag that I get from the computer store. If you want to know which flash powder is most powerfull, I have tested and tried 50/50 Potassium permanganate and Magnalium. This flash powder is the most powerfull and also the most sensitive.It has absolutely no use in pyrotecknics whatsoever. The only reason I used it was to remove a 2 foot tree stump for my father in law.Even then, we were at a safe distance and was ignited by remote.

Link to comment
Share on other sites

If you want to know which flash powder is most powerfull, I have tested and tried 50/50 Potassium permanganate and Magnalium. This flash powder is the most powerfull
This is based on what?
Link to comment
Share on other sites

I have tested and tried 50/50 Potassium permanganate and Magnalium. This flash powder is the most powerfull and also the most sensitive.It has absolutely no use in pyrotecknics whatsoever. The only reason I used it was to remove a 2 foot tree stump for my father in law.Even then, we were at a safe distance and was ignited by remote.

 

You made enough KMnO4/MgAl flash powder to remove a 2ft tree stump? Dude... I'm not sure as how evidence goes, but if it isn't the most powerful it is still enough to take your fingers off in small quantities with ease. Most KMnO4 flash powders, even saying 'one gram' makes me quiver to the thought if something were to go wrong.

 

http://www.youtube.com/watch?v=S8Iur8Cjl2Q

 

That video is said to be "roughly 5mg". That just gives you an indication of how powerful it is. Now, enough to remove a 2ft tree stump. That's not even having balls, that's stupid Cookie Man. Even if it's ignited by remote, you had to be close to it at points of time. The stuff is sensitive as heck and not to mention extremely powerful. Frankly, I would be kissing God's ass every night that you're not dead. Frankly, what you just said is perhaps one of the stupidest things I've heard someone ever do with energetic materials. Perhaps the only person to out beat you is Phone, but he's paid his price. I sincerely hope you never touch KMnO4 again and you realize how lucky you must be.

  • Like 1
Link to comment
Share on other sites

This is based on what?

 

based on the observations of someone with a mental disorder called poly kewl Dysexecutive Syndrome

 

 

I personally have no respect for anyone who has made enough of such a retarded flash comp to blow up a tree stump let alone a 2ft one (and this is coming from a guy with an avatar like mine)

Edited by Ralph
Link to comment
Share on other sites

I believe the 5413H is quite dangerous, I'm told by a factory owner.

It can be too reactive.

 

For flash, indianblack is good enough, you won't notice a real difference. And you'd better play with amounts or with the formula to get a good break or salute.

Link to comment
Share on other sites

....

 

Pyros can be very rough to someone who's doing such extreme experiments like you.

I want to be always nice with people, so I'll tell it to you the easy way:

Don't mess with KMnO4 flash compositions.

 

If you wish to stay in good health, please don't touch this stuff anymore. The most of us here will say the same thing just to help you. KMnO4 doesn't have its place in pyrotechnics, it isn't used for a good reason. I know a few local people that had permanganate compositions self ignited, luckily without accident.

Edited by 50AE
Link to comment
Share on other sites

based on the observations of someone with a mental disorder called poly kewl Dysexecutive Syndrome

 

 

I personally have no respect for anyone who has made enough of such a retarded flash comp to blow up a tree stump let alone a 2ft one (and this is coming from a guy with an avatar like mine)

Alright alright, yes that was terribly unintelligent to do, and even less intelligent to admit to, but there's no reason to get personal about it. The guy's a new member and I think everyone has gone through a stage of stupidity. Most times it's not as severe, sometimes it's even worse. He needs a kick from us all to make him realize just how bad of an idea something like that is, but no disrespect. At least, not unless he refuses to quit doing such things.

Link to comment
Share on other sites

And now that you've all expressed your opinions.....

 

Permanganate-based Flash is bad news. Period. Saying you were at a safe distance is irrelevant. As was pointed out, you had to mix it. And in doing so, you risked your life. There's a very good reason the pro's don't use it, and that's partly due to its instability. It can self-ignite without warning.

 

You were lucky. Don't push your luck.

Link to comment
Share on other sites

based on the observations of someone with a mental disorder called poly kewl Dysexecutive Syndrome

 

 

I personally have no respect for anyone who has made enough of such a retarded flash comp to blow up a tree stump let alone a 2ft one (and this is coming from a guy with an avatar like mine)

 

 

As I said before, this comp. has no use in pyrotecknics, and the member was asking which is the most powerfull flash powder.I was in no way indicating to him to go ahead and try it. And if you think I have Polly keel dysexecutive syndrome which is how you spell it ,I think your wrong.I always take all the neccessary precautions when I'm doing something. It's always nice of you guys to leave such nice comments.Is that how you welcome everyone to the forum?

Link to comment
Share on other sites

In pyrotechnics there is a 10th logarithmic relationship between ignorance and the number and severeness of accidents happening to you. Although it might sound arrogant, we actually do know a lot of things better then you do. When making a composition that is as unstable as permanganate flash, and in the quantities you did, your precautions don't matter that much anymore. You're going to kill yourself anyway. Now imagine how your family would feel about having the police picking up small pieces of you with a pair of pliers and putting those small pieces of you in a bag for investigation. Is it really worth it? NO, NOT AT ALL!!! Now go find yourself another hobby, and stop bothering us with your stupid and insane actions.

 

Edit: And yes, I'm having a bad day...

Edited by Miech
Link to comment
Share on other sites

I really don't see what all the hoopla about using dark aluminum is. Indian and 5143H are both fairly expensive and all they do is make things more sensitive. I use Crackers Bright Aluminum. Its supposedly 12micron/1200mesh which I find hard to believe but it makes some excellent flash. Its way cheaper, not as sensitive and not as sharp when used for a booster.
Link to comment
Share on other sites

I really don't see what all the hoopla about using dark aluminum is. Indian and 5143H are both fairly expensive and all they do is make things more sensitive. I use Crackers Bright Aluminum. Its supposedly 12micron/1200mesh which I find hard to believe but it makes some excellent flash. Its way cheaper, not as sensitive and not as sharp when used for a booster.

 

personally I use dark because its cheaper (for me strangely) but also because it gives less of a flash making it in my opinion better for boosting but thats just me

Link to comment
Share on other sites

Here, the Bright grade aluminium is very cheap. Let's say I can get it for 6 euros per kg. German dark is unavaible and purchasing it online is at least 4x expensive.

This bright Al works good for flash, probably not the best, but does the job. It doesn't "thump" when lit in the open.

The only thing I don't like about it is the Al itself, it's a dirty job to work with it.

Link to comment
Share on other sites

Here, the Bright grade aluminium is very cheap. Let's say I can get it for 6 euros per kg. German dark is unavaible and purchasing it online is at least 4x expensive.

This bright Al works good for flash, probably not the best, but does the job. It doesn't "thump" when lit in the open.

The only thing I don't like about it is the Al itself, it's a dirty job to work with it.

 

I know what you mean. I hated Bright Al flake so much, I traded it all to another pyro. Although some formulas really need it, I would rather do without. I couldn't stand opening a bag and just watching the mess take to the air.

Link to comment
Share on other sites

Thank you FreakyDuchman and Vensti for bringing this thread back to my original question, but is there any technical documentation to back up that 5413 h makes flash more sensitive then other aluminum. And I forget who commented on Indian blackhead correct me if im wrong but isn't that a variable product not held to any standard, just a generic name for off brand dark aluminum. And can anyone verify that 12 micron bright aluminum is more stable in flash then 5413 h. And before anyone is tempted to post a there is no safe flash post, YES i KNOW THIS. I have been involved in this hobby for three years, started off with very basic projects, have read many of Ned G's artical's made every almost every trurbo pyro project and practiced every possible safety precaution. Now let me also add you know what scares me more then flash is pressing whistle mix, certain star compositions, and the thing that scares me the most, playing with chlorate

 

I understand I'm new to the forum and people are trying to keep me safe. I appreciate that thank you. But the reason I posted this is to learn more about 5413 h's and it's use in flash and if there is a better aluminum to use.

Edited by Vrizla
  • Like 1
Link to comment
Share on other sites

Well, sensitivity depends on a couple of factors. The easier the aluminium ignites, the more sensitive. In general this means the following:

-smaller particle sizes give more sensitive flash.

-flake aluminium is more sensitive than atomized, and atomized is more sensitive than spherical.

-uncoated aluminium is more sensitive than coated aluminium.

-additives always make flash more sensitive, except for flame retarding and gap filling chemicals.

 

With 5413H being of a very high mesh, and being flake shaped, this will produce a powder which I would expect to be pretty sensitive. However, an uncoated aluminium of half the mesh but without coating (such as Black000) will preduce an even more sensitive mixture, because the aluminium burns more easily. Flash powders made with bright aluminium are unlikely to cause accidents easily (which is no reason to treath it disrespectful), and powders made with #400 spherical aluminium will hardly burn without addition of sulfur.

 

Being a chemist I'm not afraid of chlorates and using them, but I'm not ignorant either. When taking the proper precautions and having the right knowledge, potassium chlorate is one of the best oxidizers and chlorine donors around.

Link to comment
Share on other sites

×
×
  • Create New...