rbpwrd240 Posted January 2, 2017 Share Posted January 2, 2017 (edited) Here is my first fireworks show on video, I did one for the 4th last year but the stupid Fuse Connex I used ruined the show... This time I used nothing but fuse, packing tape and zip ties to link it all and do the timing. I had zero failures but I did have one set go off a bit early due to a jump fire. The first web link is to my racks that I built out of used Excalibur (HDPE) and fiberglass tubes I picked up from the free pop zone after the 4th of July last year. The second link is the show. Custom Racks New Years Eve Show Let me know what you think... Edited January 2, 2017 by rbpwrd240 2 Link to comment Share on other sites More sharing options...
Zumber Posted January 2, 2017 Share Posted January 2, 2017 Ahhh...!!Gr8 job.... Link to comment Share on other sites More sharing options...
rbpwrd240 Posted January 3, 2017 Author Share Posted January 3, 2017 Thanks!!! I think everyone was very satisfied. I call it the redemption show since I had to redeem myself after the failures using the Fuse Connex. Don't under any circumstance use fuse Connex!!!! Link to comment Share on other sites More sharing options...
OldMarine Posted January 3, 2017 Share Posted January 3, 2017 I tie my fuses with hemp twine then put a wrap of masking tape over all. Those fuse conex things suck. Link to comment Share on other sites More sharing options...
rbpwrd240 Posted January 3, 2017 Author Share Posted January 3, 2017 (edited) In over 600 shots I have only had two failures with zip ties and masking tape. Sorry Firework tape.... And yes Fuse Connex suck!!!!! Why the extra work with the hemp.... Sorry my question mark is broken... Edited January 3, 2017 by rbpwrd240 Link to comment Share on other sites More sharing options...
Recommended Posts