Jump to content
APC Forum

magnetic separator


kleberrios

Recommended Posts

Is the iron simply from the grinder jaws or is your beginning stock contaminated with iron? I think a second pass through the separator is in order.

Link to comment
Share on other sites

Is the iron simply from the grinder jaws or is your beginning stock contaminated with iron? I think a second pass through the separator is in order.

Stock contamined. Yes, a second pass was necessary. This magnesium chips was bought in the Stihl company. They are from chainsaws machining, lawnmowers, blowers etc. contamined with the iron chips.

Link to comment
Share on other sites

Do you use the Mg chips to make magnalium, or you further mill it?

If you do, how do you manage to melt it with Al?

Yes I mill it. There is much to catch fire when I melt it.

Link to comment
Share on other sites

One warning: Magnesium dust and rust powder can produce sensitive thermite mixtures. We had a couple of explosion/fires in scrap metal containers due to this, not something you'd want to stand next to.

Link to comment
Share on other sites

  • 4 weeks later...

One warning: Magnesium dust and rust powder can produce sensitive thermite mixtures. We had a couple of explosion/fires in scrap metal containers due to this, not something you'd want to stand next to.

Yes, but the Mg powder is at 40 mesh.Thanks by alert me

Link to comment
Share on other sites

×
×
  • Create New...