Maserface Posted October 12, 2015 Share Posted October 12, 2015 (edited) This is a glitter comet I made a while ago, this is an example post. Type: Comet Caliber: 3" Performance description: Glitter Formula: I dont recall (sorry) Additional Details: It was bound with SGRS (with 6.5% distilled water) and mechanically pressed at 2000psi. Once dry it was glued to a cardboard sabot and dry wrapped, lifted, and leadered. I used 10% w/w goex 2FA grained black powder as lift. Edited October 12, 2015 by Maserface 2 Link to comment Share on other sites More sharing options...
memo Posted October 12, 2015 Share Posted October 12, 2015 i would like to watch your video , i have been having problems opening videos on this forum for a couple of months. mumbles tried to fix my problem. no luck so far. memo Link to comment Share on other sites More sharing options...
memo Posted October 12, 2015 Share Posted October 12, 2015 show case forum would be nice. i like looking at peoples creations . memo Link to comment Share on other sites More sharing options...
Mortartube Posted October 13, 2015 Share Posted October 13, 2015 That's a very nice comet. If you do recall the formula a some point, please post it. Link to comment Share on other sites More sharing options...
calebkessinger Posted October 14, 2015 Share Posted October 14, 2015 Man that was GREAT Mase!!! I need to build you a crossette base to go with that pump !!! Link to comment Share on other sites More sharing options...
VikingPyrotechnics Posted October 16, 2015 Share Posted October 16, 2015 Very nice Comet Link to comment Share on other sites More sharing options...
memo Posted October 18, 2015 Share Posted October 18, 2015 looked great Link to comment Share on other sites More sharing options...
Recommended Posts